Minolta MNCD36, User Manual

Page: 10 / 21

1. In VIDEO mode, press the
MENU
button. Select ‘Loop Recording’ by using the
UP
or
DOWN
buttons. Press the
OK/RECORD
button to enter the ‘Loop Recording’
submenu.
2. Press the
UP
or
DOWN
buttons again to navigate the submenu, and select a setting.
You can select from OFF , 1 Minute Loop, 3 Minute Loop and 5 Minute Loop.
3. Press the
OK/RECORD
button to confirm your selected setting.
4. To exit the settings menu, press the
MENU
button twice and your camcorder will return
to the main status screen of the current mode.
4.1.3 Audio Recording
This setting allows you to select the built-in microphone ON or OFF during a video recording.
Once you select an option, your camcorder will either record audio within the video file, or
record a video file without the audio.
1. In VIDEO mode, press the
MENU
button. Select
‘Audio Recording’
by using the
UP
or
DOWN
buttons. Press the
OK/RECORD
button to enter the ‘Audio Recording’
submenu.
2. Press the
UP
or
DOWN
buttons again to navigate the submenu, and select a setting.
You can select from
OFF
and
ON
.
3. Press the
OK/RECORD
button to confirm your selected setting.
4. To exit the settings menu, press the
MENU
button twice and your camcorder will return
to the main status screen of the current mode.
4.1.4 Motion Detection
This setting automatically begins recording if movement is detected in front of the camcorder
lens. Once recording, the camcorder will stop recording if not further movement is detected
within a 10-second period of the last movement registered. You may also manually stop
recording anytime by pressing the
OK/RECORD
button during a recording.
1. In VIDEO mode, press the
MENU
button. Select
‘Motion Detection’
by using the
UP
or
DOWN
buttons. Press the
OK/RECORD
button to enter the
‘Motion Detection’
submenu.
2. Press the
UP
or
DOWN
buttons again to navigate the submenu, and select a setting.
You can select from
OFF
and
ON
.
3. Press the
OK/RECORD
button to confirm your selected setting.
4. To exit the settings menu, press the
MENU
button twice and your camcorder will return
to the main status screen of the current mode.