Minolta EP6000, Operator'S Manual

Page: 35 / 193

Initial Mode and Panel Resetting
Auxiliary Finishing Orig. Copy
Exposure Paper Zoom
Ready to copy.
Auto Expo. x1.000 Auto Paper
1075O270CA
1
Basics
1075O270CA
No. of copies selected: 1
Paper
: Auto Paper
Zoom
:
×
1.000
Exposure : Auto Expo.
Orig. Copy : 1 2
▼ ▼
Finishing
: Non-Sort
When the Power Switch is turned ON, the Basic screen appears on the Touch Panel. The settings on
this screen are called the initial mode.
Note: The Basic screen serves as the reference for all panel settings to be later made.
Initial Mode
The initial mode can be changed. For details, see User’s Choice.
➭
p. 119
Useful Tip
The Panel Reset Key resets all control panel settings to default settings including the number of
copies selected and zoom ratio.
Panel Resetting
The Panel Reset Key enables you to cancel all previous settings efficiently. To avoid miscopy, try
to press this key before making any setting for your own job.
Useful Tip
If no key on the control panel is pressed within about 60 seconds after a copy cycle has been
completed or copying settings made, the Auto Reset function is activated to return the copier to the
default settings.
Auto Reset Function
The Auto Reset function can be enabled or disabled by the User’s Choice. For more details, see
User’s Choice.
➭
p. 119
Useful Tip
Note: If Duplexing Document Feeder AFR-9 is
used, the original present on the Original
Glass will be ejected out of the unit.
Access
Energy Saver
Interrupt
Panel Reset
1134P336CA
Ch
a
p
te
r 2
F
ir
st
T
h
in
gs
to K
n
ow
abou
t yo
ur
C
opi
er
5. Turning ON and OFF, and Resetting the Copier
22