Minolta EP6000, Operator'S Manual

Page: 134 / 193

3/6 4/6
Auto Panel Reset
Selects the time it takes the auto panel reset
function to be activated from among "1
min.," "2 min.," "3 min.," or "5 min.," or not
activate the function at all ("No Reset").
The initial setting is "1 min."
Energy Saver Mode
Selects whether to set the copier into the
Energy Saver Mode after a given time after
a copy cycle has been completed or a Key
operated, or not ("OFF"). If it is turned ON,
you need to set the time it takes the copier to
enter the Energy Saver Mode, from 1 to 10
minutes.
The initial setting is "OFF."
Drum Dehumidifier
Selects whether to set ("ON (Auto)") the
copier into the Drum Dehumidifier mode
automatically as soon as the copier
completes warming up, or not ("OFF").
The initial setting is "OFF."
Counter Removal
Determines whether to reset the panel
("ON") or not ("OFF") when the Plug-In
Counter is pulled out of the copier or a
magnetic card pulled out of the Data
Controller.
The initial setting is "ON."
Intelligent Sort
Specifies whether to turn "ON" or "OFF" the
function that automatically switches
between the Sort and Non-Sort mode,
selecting Non-Sort if only a single original
is loaded on the AFR-9 and Sort if two or
more originals are loaded on the AFR-9.
The initial setting is "OFF."
Confirmation Beep
Selects whether to turn "ON" or "OFF" the
beep that sounds each time a key on the
Touch Panel is touched.
The initial setting is "ON."
Original Thickness
Selects whether to allow ("Thin") the user to
make copies from thin originals in addition
to the standard ones or not ("Standard")
using the AFR-9.
The initial setting is "Standard."
Smaller Originals
Selects whether to "ON" or "OFF" when the
Start Key is pressed with no originals placed
on the Original Glass or with an original
smaller than the detectable size placed on
the Original Glass in the Auto Paper Mode.
If "ON" is selected, the copy cycle is run
using the paper loaded in the default paper
source. If "OFF" is selected, a warning
message appears to instruct the user to select
paper.
The initial setting is "OFF."
Ch
a
p
te
r 4
Us
in
g th
e Us
er
M
o
d
e
121