Minolta EP6000, Operator'S Manual

Page: 167 / 193

1. When This Type of Copy is Produced
Symptom Possible Cause Action
The Image is too light. The exposure level for the Auto
Exposure Mode is set at one of the
"Light" levels. Change the setting of the User’s
Choice (Exposure Priority).
➭
p. 120
Cancel the Auto Exposure Mode
and select the Manual Exposure
Mode to adjust the exposure level
to obtain a darker image.
➭
p . 45
The manual exposure level is set
on the lighter side. Touch the Key as
necessary to obtain a darker image.
➭
p. 45
You have been making copies from
a photo or an original with a large
dark area. The copier needs more toner.
Replenish toner by using the Toner
Replenisher Function in the User
Mode.
➭
p. 117
The Toner Bottle has just been
replaced. The copier needs more toner.
Replenish toner by using the Toner
Replenisher Function in the User
Mode.
➭
p. 117
The message "Replenish toner" or
"Please add toner" is shown on the
Touch Panel. Replace the Toner Bottle with a
new one.
➭
p. 132
The paper is damp. Replace the paper.
➭
p. 128
The Image is too dark. The exposure level for the Auto
Exposure Mode is set at one of the
"Dark" levels. Change the setting of the User’s
Choice (Exposure Priority).
➭
p. 120
Cancel the Auto Exposure Mode
and select the Manual Exposure
Mode to adjust the exposure level
to obtain a lighter image.
➭
p. 45
The manual exposure level is set
on the darker side. Touch the Key as
necessary to obtain a lighter image.
➭
p. 45
The entire surface of the Original
Glass is dirty. Wipe the Original Glass clean with
a soft dry cloth.
➭
p. 169
The original is not held tightly
against the Original Glass. Place the original in position so
that it is held tightly against the
Original Glass.
➭
p. 32
The Copy is blurry. The paper is damp. Replace the paper.
➭
p. 128
DARKER
LIGHTER
1074O110
1074O109
1074O108
Ch
a
p
te
r 6
T
roub
les
h
oot
in
g
154