Minolta CR-400 -, Instruction Manual

Page: 80 / 159

78
Data Processor Prepation
Displaying Measurement Results
<Selecting the Color Space>
Using this instrument changes the color space as below.
(Color spaces) XYZ, Yxy, L*a*b*, Hunter Lab, L*C*h, Munsell (illuminant C only), CMC(l:c),
CIE1994, Lab 99, LCh99, CIE2000, CIE WI/Tw (illuminant D
65
only),
WI ASTM E313 (illuminant C only), YI ASTM D1925 (illuminant C only),
YI ASTM E313 (illuminant C only)
* User index
•
The displayed color space can be selected depending on the displayed color limit. (See P.72 “Basic
Setting”.)
* Up to 6 data can be displayed if a user index is registered. (See P.127 “User Index” )
See P.79 "Color Space and Changing the Display" and P.80 "Color Space and Color Difference Set-
ting" for details on the setting conditions for the color space.
[Operating Procedure]
1 Press the Color Space key to select the color space.
•
The display changes every time the key is pressed.
[Absolute value/color difference for color difference measurement (example)]
⇒ ⇒
⇐ ⇐
⇑
⇓
XYZ Yxy L*a*b*
Munsell
(illuminant C only)
L*C*h
Hunter Lab
[Setting conditions]
•
The color difference target color is set.
•
Absolute value/color difference display is selected
by pressing the Change Display key
５
ＪＫＬ
.
•
6 color spcaces shown above are selected by setting
displayed color limit.
Ｔ００ ［０００１］
ｘ＝ ７４．１２
ｙ＝ ７４．７１
ｚ＝ ６８．３３
Δｘ＝ ＋０．０８
Δｙ＝ ＋０．０８
Δｚ＝ ＋０．２７
Ｐ００
C P
［００３０］
Ｔ００ ［０００１］
Ｌ＝ ８６．４４
ａ＝ １．７４
ｂ＝ １３．７１
ΔＬ＝ ＋０．０５
Δａ＝ −０．０1
Δｂ＝ −０．１２
ΔＥ＝ ０．１３
Ｐ００ C P ［０００１］
Ｔ００ ［０００１］
Ｌ＊＝ ８９．２６
Ｃ＊＝ １４．９９
ｈ＊＝ ８３．３６
ΔＬ＊＝ ＋０．０４
ΔＣ＊＝ −０．１５
ΔＨ＊＝ −０．０１
ΔＥ＊＝ ０．１６
Ｐ００ C P ［０００１］
［０００１］
ＭＵＮＳＥＬＬ
Ｈ＝ ９．７ ＹＲ
Ｖ＝ ８．８
Ｃ＝ ２．１
Ｐ００
C P
［０００１］
Ｔ００ ［０００１］
Ｙ＝７４．７１
ｘ＝ ０．３４１３
ｙ＝ ０．３４４０
ΔＹ＝−０．０８
Δｘ＝−０．０００３
Δｙ＝−０．０００３
Ｐ００ C P ［０００１］
Ｔ００ ［０００１］
Ｌ＊＝ ８９．２６
ａ＊＝ １．７３
ｂ＊＝ １４．８９
ΔＬ＊＝ ＋０．０４
Δａ＊＝ −０．０１
Δｂ＊＝ −０．１５
ΔＥ＊＝ ０．１６
Ｐ００ C P ［０００１］