Minolta CR-400 -, Instruction Manual

Page: 64 / 159

62
Data Processor Prepation
3
Insert the AC adapter power plug to an AC outlet (100-240 Vac).
<Power Supply>
•
If the batteries are installed in both measuring head
and data processor and the AC adapter is used, the
power is supplied by AC adapter.
•
If the connected measuring head and data processor
are used, the power is supplied from data processor to
measuring head.
If the batteries are installed in data processor and the
AC adapter is used, the power is supplied by AC
adapter. The power is not supplied from measuring
head to data processor.
AC adapter terminal
Notes on Use
•
Before connecting or removing the AC adapter, make sure that power is turned off.
[Operating Procedure]
1 Make sure the power switch is turned OFF (O).
2 Connect the AC adapter connector plug to the AC adapter terminal on the rear of
the instrument.