MINOLTA-QMS PagePro 4100 Series, Service Manual

Page: 5 / 126

ii
3.Use the specified parts.
4.Handle the power cord with care and never use a multiple socket.
5.Be careful about the high-voltage parts.
6.Do not keep your hands wet when performing the procedures.
7.Do not touch a high-temperature part.
8.Make a ground connection at all times (This item may not be effected in the USA).
9.Do not modify the product.
• For replacement parts, always use the genuine parts specified in the manufac-
turer’s Parts Manual. Installing a wrong or unauthorized part could cause
dielectric breakdown, overload, or undermine safety devices resulting in possi-
ble electric shock or fire.
• Replace a blown electrical fuse or thermal fuse with its corresponding genuine
part specified in the manufacturer’s Parts Manual. Installing a fuse of a differ-
ent make or rating could lead to a possible fire. If a thermal fuse blows fre-
quently, the temperature control system is probably the cause, and action must
be taken to eliminate the problem.
• Do not break, crush or otherwise damage the power cord. Placing a heavy
object on the power cord, or pulling or bending it may damage it, resulting in a
possible fire or electric shock.
• Do not use a multiple outlet to which any other appliances or machines are
connected.
• Be sure the power outlet meets or exceeds the specified capacity.
• A part marked with the symbol shown on the left carries a high voltage.
Touching it could result in an electric shock or burn. Be sure to unplug the
power cord before servicing this part or the parts near it.
• Do not unplug or plug in the power cord, or perform any kind of service or
inspection with wet hands. Doing so could result in an electric shock.
• A part marked with the symbol shown on the left and other parts such as the
exposure lamp and fusing roller can be very hot while the machine is ener-
gized. Touching them may result in a burn.
• Wait until these parts have cooled down before replacing them or any sur-
rounding parts.
• Be sure to connect a ground wire to the ground terminal even when performing
an inspection or repair. Without proper grounding, electrical leakage could
result in an electric shock or fire.
• Never connect the ground wire to a gas pipe, water pipe, telephone ground
wire, or a lightning conductor.
• Modifying this product in a manner not authorized by the manufacturer may
result in a fire or electric shock. If this product uses a laser, laser beam leakage
may cause eye damage or blindness.