Warranty Considerations
41
Eng
li
s
h
International Notices
Power Cord
The following power cord requirements are in effect for the 220v
magicolor
2210.
Voltage
Attention Norwegian users: This equipment is designed to operate within
an IT power system where the line-to-line voltage does not exceed 240v.
Lithium Batteries
Attention Swiss users: Lithium batteries need to be disposed of in accor-
dance with Annex 4.1 of SR814.013.
Warranty Considerations
Various factors can affect a printer’s warranty. Two important ones are con-
sumables and electrostatic discharge. Read your printer warranty carefully.
5
"
Don’t return any merchandise to the manufacturer without calling for a
return merchandise authorization (RMA) number. Refer to the Service
& Support Guide
for the Support telephone number where you can
obtain an RMA number.
If you have any questions, refer to www.minolta-qms.com.
Consumables and Your Warranty
Use of consumables not manufactured by MINOLTA-QMS or use of non-
supported print media may cause damage to your printer and void your
warranty. If MINOLTA-QMS printer failure or damage is found to be directly
attributable to the use of non-MINOLTA-QMS consumables and/or accesso-
ries, MINOLTA-QMS will not repair the printer free of charge. In this case,
standard time and material charges will be applied to service your printer for
that particular failure or damage.
To order consumables and accessories, go to www.q-shop.com or
check the
Service & Support Guide for the MINOLTA-QMS office closest to you.
Minimum
0.75 mm
2
Minimum
H05 VV - F
The male plug is certified in the country in which the equipment is to be
installed, and the female plug is an IEC 320 connector.
Summary of Contents for MAGICOLOR 2210
Page 1: ...English magicolor 2210 Installation Guide 1800668 001C ...
Page 48: ......
