2.6 Printout Selection in Simplex Mode
Printed paper is delivered and stacked either facedown or faceup depending
on the printout position selected (Figure 2–2). When faceup is selected,
printed paper is delivered faceup to the rear output tray. Although the
rear output tray can be used to stack paper faceup from a cassette, it
is used primarily to stack manually fed envelopes, transparencies, labels
and heavier weight (thicker) papers. See Section 2.9 for information about
manually feeding print media.
When duplex/facedown is selected, printed paper is delivered facedown to
the top output tray. Your print job is collated in the correct page order when
it is delivered to the top output tray.
NOTE:
You cannot select the printout delivery (faceup or duplex/facedown)
through a command from the host computer; positioning the printout selector
is the only way to select the printout delivery for all modes of operation.
Figure 2–2:
Printout Selections
MLO-005122 (Figure 2-7; 19 picas)
CAUTION:
Do not try to change the printout selector while the printer is
printing. Changing the printout selector during printing causes paper jams.
2–8
DEClaser 2200 Printer Operator’s Guide
Summary of Contents for Magicolor 2200 DeskLaser
Page 67: ...Figure 2 5 Test Print A MLO 004895 Figure 2 38 36 picas Operating Information 2 39 ...
Page 71: ...Figure 2 6 Test Print B MLO 004852 Figure 2 39 36 picas Operating Information 2 43 ...
Page 226: ...Figure C 2 Serial Connections to Modem MLO 004885 Figure C 2 19 picas Specifications C 5 ...
