Table 1–3: Printer Components: Rear Output Tray
Component
Function
8. Extension Tray
Must be extended when printing documents faceup.
See Section 2.6.2 for information about using the
extension tray.
9. Paper Jam Clearance Lever
Lifting this lever allows you to access paper jams in
the rear output tray area. See Section 6.7 for more
information about clearing paper jams.
10. Printout Selector
Selects the rear output tray for faceup documents, or
the top output tray for facedown documents when the
printer is in simplex mode. The duplex position is
used when the printer is in duplex mode and delivers
paper facedown to the top output tray.
NOTE:
The printer ‘‘beeps’’ if you try to select duplex
mode and the printout selector is not set to the duplex
position. The printout selector must be set to the
duplex position to print in duplex mode.
11. Paper Support Guide
This guide is raised during printing in duplex mode
(Section 2.7). The guide supports the paper as it
moves over the rear output tray during the reversing
cycle.
Printer Components
1–7
Summary of Contents for Magicolor 2200 DeskLaser
Page 67: ...Figure 2 5 Test Print A MLO 004895 Figure 2 38 36 picas Operating Information 2 39 ...
Page 71: ...Figure 2 6 Test Print B MLO 004852 Figure 2 39 36 picas Operating Information 2 43 ...
Page 226: ...Figure C 2 Serial Connections to Modem MLO 004885 Figure C 2 19 picas Specifications C 5 ...
