4.5.5 INITIAL Menu
The INITIAL menu (Table 4–12) combines the macro, paint, and paper size
features. You can save settings from this menu only in NVRAM.
Table 4–12: INITIAL Menu Features and Values
Feature
Values
Description
macro
000
1
–099
Assigns the user preference set and device identification
answer (see Section 4.5.5.1).
paint
Partial
1
None of the memory is reserved for bitmap pages.
Memory is allocated dynamically.
Full
Directs the printer to allocate memory space for one
full bitmap page (A4 or letter-size). The Full setting
eliminates complex errors but may slow the printer down
if all pages require a full bitmap.
NOTE:
This value can be activated only if at least 1 MB
of optional RAM is installed in the printer.
Dual
Directs the printer to allocate memory space for two full
bitmap pages (A4 or letter-size). The Dual setting allows
you to print at a more efficient speed for documents that
require full page bitmaps for all pages. It also allows you
to print duplex pages, for which each side requires a full
page bitmap. The Dual setting requires more memory
space that must be shared with fonts.
NOTE:
This value can be activated only if at least 2 MB
of optional RAM is installed in the printer.
paper
Letter
1
Specifies letter-size (8 ½" x 11.0") paper for manual feed
operation.
A4
Specifies A4-size (297 mm x 210 mm) paper for manual
feed operation.
1
Factory default setting.
4–24
DEClaser 2200 Printer Operator’s Guide
Summary of Contents for Magicolor 2200 DeskLaser
Page 67: ...Figure 2 5 Test Print A MLO 004895 Figure 2 38 36 picas Operating Information 2 39 ...
Page 71: ...Figure 2 6 Test Print B MLO 004852 Figure 2 39 36 picas Operating Information 2 43 ...
Page 226: ...Figure C 2 Serial Connections to Modem MLO 004885 Figure C 2 19 picas Specifications C 5 ...
