M-Box
Manual
14
OPERATION
INSTRUCTIONS
∆Make sure M-Box on/off switch is in the OFF
position
∆Make sure vibrator switch is in the OFF position
∆Check rubber seal covers on the vibrator plugs
∆Extension cords before plugging into the box.
∆Select the desired Speed (see figure 1)
∆Turn on vibrators individually at switch
∆The M-Box will run both vibrators to the same
speed.
∆Always turn off vibrators at the switch. This
ensures that there is not an accidental vibrator
turn-on when box is turned to ON position
∆Turn the Selector Switch to the OFF position
∆Unplug the M-Box plug from the portable Gen-
erator Source.
Starting Procedures
Always shut off the vibrators at the vibrator
switch instead of the X-box Switch. Con-
trolling on/off switching at box may lead to
unintended start of the vibrator units.
The M-box converter is designed to run (2)
individual 230v; 3phase concrete vibrators
with 100 feet of extension cord on each
unit. The box is designed to run up to 10.5
amps. The M-Box can be plugged into any
230v; 50/60 Hz receptacle of a 5,000-watt
portable generator.
Shut-down Procedures
DO NOT OPEN M-BOX ENCLO-
SURER. Electric shock can occur
due to components being en-
ergized even AFTER being un-
plugged. Contact a qualified ser-
vice technitian or the manufacturer.
Summary of Contents for M-BOX
Page 15: ...15 M BOX Manual NOTES ...
