background image

5

M-BOX

 Manual

     

GENERAL

 

SAFETY

 

∆ NEVER operate this equipment without 

proper protective clothing, shatter proof 

glasses, respirator protection, hearing pro-

tection, steel-toes boots and other protec-

tive devises required by the job or city and 

sate regulations.

 

∆ Never operate this equipment 

when not feeling well due to 

fatigue, illness or when under 

medication.

 

∆ NEVER operate this equipment under the 

influence of drugs or alcohol.

 

∆ ALWAYS check the equipment for loosened 

threads or bolts before starting.

 

NEVER operate around corrosive chemicals 

or water containing toxic substances. These 

fluids could create serious health and envi-

ronmental hazards. Contact local authorities 
for assistance.

 

∆ DO NOT use the equipment for any purpose 

other than its intended purpose or applica-

tions.

 

∆ This equipment should only be operated by 

trained and qualified personnel 18 years of 

age and older.

 

∆ This equipment is for industrial use only. 

Whenever  necessary,  replace  nameplate,              

operation and safety decals when  

 

they become difficult to read.

 

∆ Manufacturer does not assume responsibility 

for any accident due to equipment modifica-

tions. Unauthorized equipment modifications 

will void all warranties. Any modification 

which it could lead to change in the original 

characteristics of the machine should be 

made only by the manufacturer who shall 

confirm that the machine is in comfortability 

with appropriate safety regulations.

 

∆ Never use accessories or attachments that are 

not recommended by Minnich for the equip-

ment. Damage to the equipment and/or injury 

to user may result.

 

∆ Always know the location of the 

nearest fire extinguisher.

 

∆ ALWAYS know the location of the 

nearest first aid kit.

 

∆ ALWAYS know the location of the nearest 

phone or keep a phone on the job site. Also, 

know the phone numbers of the nearest 

ambulance, doctor and fire department. This 

information will be invaluable in the case of an 

emergency.

 

∆ NEVER operate the equipment in an 

explosive atmosphere, near combus-

tible materials, or near flammable or 

low flash point fluids. An explosion or 

fire could result causing severe bodily 

harm or even death.

 

∆ NEVER disconnect any emergency or safety 

devices. These devises are intended for op-

erator safety. Disconnection of these devices 

can cause severe injury, bodily harm or even 

death. Disconnection of any of these will void 

all warranties.

 

∆ NEVER operate equipment with the covers or 

guards removed. Keep fingers, hands, hair and 

clothing away from all moving parts to prevent 

injury. Wear clothing that will not likely be-

come caught in the equipment or snag on any 

moving parts.

 

∆ALWAYS be sure the operator is familiar 

with the proper safety precautions and op-

erating techniques before using.

 

∆NEVER leave the machine unattended. 

Turn off when unattended

Summary of Contents for M-BOX


















Reviews: