minnkotamotors.com
INSTALLATION
5
minnkotamotors.com
6"
FIGURE 2
Step 1: Determining a Mounting Location
Your Talon must have a clear unobstructed path to deploy. The Talon
mounting bracket included with your unit will allow for approximately
6" of clearance from the transom to the front edge of the deploying anchor.
(Figure 2)
Note: The Talon
mounting bracket can be mounted directly to the transom
(recommended) or to an adapter plate when direct transom mounting is not
possible due to obstructions. For more information on adapter plate brackets
and other Minn Kota Talon accessories, please visit minnkotamotors.com.
Note: Check to make sure that your
proposed location will allow the
anchor to deploy without
hitting trim tabs, poling
platforms, ladders, engine, or
other obstructions.
Note: When selecting the
Talon mounting bracket mounting
location; examine your boat to
ensure that you will not drill into any
obstructions and that the
hardware will be accessible
for assembly.