![background image](http://html.mh-extra.com/html/minn-kota/talon/talon_installation-manual_1802751018.webp)
minnkotamotors.com
18
minnkotamotors.com
3.
Align the closest set of holes on the water deflection shield with the mating
holes in the corners of the main mounting bracket, so that the water deflec-
tion shield has a slight downward curve to it. (There should be no gap be-
tween the water deflection shield and the outer extrusion of the Talon)
4.
Install the 2 (#8-18 x
5
⁄
8
") screws, and
the 2 washers thru the water deflection
shield, and into the corner holes of the
main mounting bracket.
**NOTE**If you adjust the angle of
your Talon once after step is complete,
you will need to readjust the placement
of
the water deflection shield to ensure
proper functionality.
VERIFYING INSTALL ATION
1.
Carefully inspect the area around the Talon for any obstructions that may in-
terfere with deployment. (For this test your Talon must be able to deploy and
make contact with the ground without hitting any obstructions.)
FIGURE 22
Rough Water Mode
Indicator Light
Rough Water Mode
On/Off Button
Deploy
Stow
Depth of Deployment
Indicator Lights
FIGURE 21