minnkotamotors.com
8.
NOTE: There may be other accessories or connections to the starting
battery (battery selector switch). Make sure all connections are properly
attached and secured.
9.
Secure the power cable by using the enclosed wire ties. Excess wire can
be stored inside the battery compartment.
16
Power Cable from Talon
Master Power Switch
(recommended)
Sealed Heat
Shrink Connection
Minimum 18AWG Wire
Optional direct
to battery connection
See ABYC Compliance
note on step 1
The green wire must
be connected so
that 12V is present
ONLY when the
ignition is in the RUN
and START positions.
Blue Area Indicates Optional Deployment Alarm
OFF
ON
12V
Ignition Switch
OFF
RUN
START
FIGURE 18
Detailed Wiring Diagram