![background image](http://html1.mh-extra.com/html/minn-kota/mka-55/mka-55_manual_1802849009.webp)
TOOLS AND RESOURCES REQUIRED
Item /
Assembly
Part #
Description
Qty.
A
Items
2-22
2992370 STABILIZER,BOW MNT E.STEER ASM
1
2
2372675 PIN, BOW MOUNT STABILIZER
1
4
2373720 PLUNGER, BOW MOUNT STABILIZER
1
6
2370111
KNOB, BOW MNT STBLZR, TRI-LOBE
1
8
2371680 BASE, REMOVABLE, BOWMNT
STBLZR
1
10
2373300 SWIVEL BASE,BOW MNT STABILIZER
1
12
2373825 STRAP, BOW MOUNT STABILIZER
1
14
2373142 NUT-HEX, M6, BOWMNT STABILIZER
1
16
2373640 ROD, BOW MOUNT STABILIZER
1
18
2371991
BASE, BOW MOUNT STABILIZER
1
20
2372370 BODY, BOW MOUNT STABILIZER
1
22
2263107 NUT-HEX 3/4-10 UNC NYLON
1
B
Item 24
2994934 BAG ASM, EL.STEER STABILIZER
1
24
2263434 SCREW-#8-18X1" PPH S/S
4
24
B
•
Drill
•
9/64" Drill Bit
•
#2 Phillips Screw Driver
•
Awl, pencil or similar marking tool
•
Scissors
•
Hack Saw
p
Not shown on Parts Diagram.
✖
This part is included in an assembly and cannot be ordered individually.
minnkotamotors.com | 1
©2017 Johnson Outdoors Marine Electronics, Inc.
6
12
2
4
8
18
10
22
16
20
14
A
MOUNTING CONSIDERATIONS
Complete Typical Installation
Complete Typical Installation
NOTE:
Images are a graphical representation and
may vary from your motor.
Save the packaging!
A template for installation is printed on the back of
the card included in the packaging.
MKA-55 Bow Mount Stabilizer Kit
1862051
COMPATIBLE WITH MOST MINN KOTA® ELECTRIC-STEER, BOW-MOUNT TROLLING MOTOR MODELS,
INCLUDING THE ULTERRA™, TERROVA®, POWERDRIVE™, POWERDRIVE V2, AND POWERDRIVE PONTOON.
The Bow Mount Stabilizer Kit is used to stabilize the motor
Shaft and Control Head to reduce bouncing when the motor
is stowed and transported. Attention to detail is needed for
successful installation.
Before mounting the Bow Mount
Stabilizer Kit, give consideration to the following:
a. Minn Kota recommends mounting the Bow Mount
Stabilizer Bracket along the trolling motor Shaft
reasonably close to the Control Head when the motor
is stowed.
b. Boats vary in the construction of the deck and
gunwale. Make sure the area under the mounting
location is flat, clear to drill holes and install screws.
It may be necessary to shim or modify the deck or
Outboard View
Inboard View