866.463.2611 • www.ecosystemsdisplays.com
Setups
Order ##### - ECO-29C Sustainable Display Stand
1
2
3
Shelf
Wing
3
2A
When assembled
Item
1
2/2A
3
Qty.
1
1/1
2
Description
Base Plate
33” Q914 Vertical Extrusion
14” Z32 Waterfall Bracket
Steps:
1) Assemble verticals [2] & [2A]. See
Q914 Connector
detail.
2) Install Base Plate to vertical [2/2A].
3) Connect A10 Clamps to left and right sides of vertical [2/2A];
insert wings. See
A10 Clamp
detail.
4) Install Waterfall Brackets [3] to front and back of vertical [2/2A].
5) Attach Laptop Shelf to front of vertical [2/2A]. See
Shelf Attachment
detail.
6) Affix Header Graphics to front and back using Velcro, as shown.
2) Tighten set screw to
secure A10 to extrusion.
1) Slide A10 connector
into groove of extrusion.
A10 Clamp
Wing
4) Tighten knob to secure
wing in place.
3) Insert wings into clamp.
1
2
3
4
Screws
Connector
Q914 Connector
Slide extrusion over
connector and rest on
lower vertical.
Secure with screws.
Note:
To prevent product
loss, Keep all screws
attached to connector
piece after disassembling.
*
*
*
Shelf Attachment
Insert lock into groove
of vertical extrusion and
tighten setscrew.
*
Lock
Setscrew
Back of Shelf
Setscrew will face
outward for ease
of assembly
Header
Graphic
