minnkotamotors.com | 9
©2021 Johnson Outdoors Marine Electronics, Inc.
INSTALLATION
g. Rotate the Upper Arm back in place to close the
mount.
h. Align the Upper Arm Holes with Upper Bowguard
j. Route the Rope through the Pull Grip Handle and
small Washer. Secure it by tying a Figure Eight Knot.
Upper Arm
Upper Arm
Nylock Nut
Nylock Nut
Figure Eight
Figure Eight
Knot
Knot
Bushing
Bushing
Pull Grip Handle
Pull Grip Handle
Washer
Washer
Washer
Washer
Bowguard
Bowguard
NOTICE:
The two Bushings in the Upper Arm may
come out. Re-assemble them into the Upper Arm
making sure the “keys” of the inserts are aligned
with the “key” punchouts in the Upper Arm.
Ears and install the Upper Pin.
i. Re-install the Washer and Nylock Nut and tighten
using two 1/2" Wrenches.
3
4
c. Open the mount by lifting the Upper Arm up and
opening the mount so it lays flat.
Rope
Rope
E-Clip
E-Clip
Eyelet
Eyelet
Lower Pin
Lower Pin
Lower
Lower
Arm
Arm
Lower
Lower
Bouguard
Bouguard
Ears
Ears
Lower
Lower
Bouguard
Bouguard
Ears
Ears
Bowguard
Bowguard
WARNING
Carefully lower the Bowguard into place to avoid creating a
pinch point between the Bowguard and Mount.
2
d. Align the Lower Arm and the Lower Bowguard Ears.
Once aligned, insert the Lower Pin, pushing it
through both the Lower Arm and the Bowguard Ears.
e. Re-install the E-Clips into the Lower Pin.
f. Take the Rope and route it under the Lower Pin and
through the bottom of the Eyelet and out the top of
the Bowguard.
