![background image](http://html1.mh-extra.com/html/minn-kota/endura-max-engine-mount-101/endura-max-engine-mount-101_owners-manual_1802768008.webp)
8 | minnkotamotors.com
©2021 Johnson Outdoors Marine Electronics, Inc.
INSTALLATION
a. With the Mount closed, use two 1/2” Wrenches to
remove one of the two Nylock Nuts and Washers from
the Upper Pin. Then remove the Pin from Mount.
Mount
Mount
Upper Pin
Upper Pin
Lower Pin
Lower Pin
Nylock Nuts
Nylock Nuts
& Washers
& Washers
Upper
Upper
Arm
Arm
Bushing
Bushing
E-Clip
E-Clip
• (2) 1/2” Wrenches
• 9/32” Drill Bit
TOOLS AND RESOURCES REQUIRED
INSTALLATION
INSTALLATION OF MOTOR TO MOUNT
NOTICE:
The two Bushings in the Upper Arm may
come out. If so, keep them for re-assembly.
b. Using a pair of Pliers, remove the Spring Clip from
the Lower Pin. Remove the Lower Pin from Mount.
Bushing
Bushing
• A second person to help
with the installation
• Standard or Needle Nose Pliers
• File or Sandpaper
• Hand Saw
• 3/8” Nut Driver
NOTICE:
This motor weighs approximately 60 lbs.
We recommend having a second person help with
the installation.
1
WARNING
Make sure that the Power Cables from the battery are
disconnected, or that the breaker, if equipped, is “off.”