minnkotamotors.com | 3
©2018 Johnson Outdoors Marine Electronics, Inc.
InstallatIon
Before installing your PowerDrive Foot Pedal, make sure that it is compatible with your motor. To review compatibility, please
refer to the "Compatibility" section of this manual. When placing the PowerDrive Foot Pedal on your boat, select a location that
will not obstruct boat operation and that is appropriate for trolling motor operation. Place the PowerDrive Foot Pedal in a foot
pedal well on your boat if it has one, or any location where it will be free from water and debris.
Item /
Assembly
Part #
Description
Qty.
A
2994859
BAG ASY-TERROVA/V2,RUB.BUMPERS
1
B
2994727
FOOT PEDAL ASSEMBLY, PD
1
1
2377167
p
MANUAL-FT PEDAL, POWERDRIVE V3
1
2
2325110
PAD, FOOT PEDAL PD
5
B
2
A
INSTALLATION PARTS LIST
MOUNTING CONSIDERATIONS
INSTALLING THE POWERDRIVE & RIPTIDE POWERDRIVE FOOT PEDAL
Your new PowerDrive Foot Pedal accessory comes with everything you’ll need to directly install it on your trolling motor. These
instructions are intended to show how to install your new PowerDrive Foot Pedal on a PowerDrive trolling motor. Please review
the parts list and mounting considerations for installation prior to getting started. For additional product support, please visit
minnkotamotors.com
.
NOTE:
Adding the Foot Pedal pads is optional.
The pads are recommended when using
the Foot Pedal on non-carpeted surfaces.
1
Foot Pedal
Bottom
Foot Pedal
Pad Placement
ITEM(S) NEEDED
#2 x 5
#B x 1
a. Take the Foot Pedal (Item #B) and turn it over.
Put a Foot Pedal Pad (Item #2) in each of the
pad locations.
INSTALLATION
Installing the PowerDrive & Riptide PowerDrive Foot Pedal
p
Not shown on Parts Diagram.
