REMEMBER to shut the power off at the circuit breaker or fuse
ER[
Follow the steps below to connect the fan to your house supply wires.
Use the wire nuts supplied with your fan. Secure the wire nuts by
wrapping the connection with electrical tape.
Step 1. Connect the black(hot)wire from the ceiling to the black and the
blue wires from the fan. Connect the white(Neutral)wire from the
ceiling to the white wire from the fan.(Fig 10)
Step 2. If your outlet has a ground wire(Green or Bare Copper)connect
the fan ground wires (on hanger ball and hanger bracket)to it;otherwise,
connect the fan ground wire on hanger ball directly to hanger bracket.
Step 3. After the splices are made, spread the wires apart so that the
green and white wires are one side of the outlet box and the black wire
(and the blue wire if light kit is installed)are on the other side of the
outlet box. Turn splices upward and tuck them carefully into outlet box.
Figure 11 & 12 Illustrate the wiring connections using optional wall unit.
(Available at your Minka-Aire
®
Retailer.)
NOTE: If a light kit is not included with your fan, one can be purchased
at your Minka-Aire
®
Retailer. Use only with light kits marked "Suitable
for use in wet location."
ELECTRICAL CONNECTIONS
5
