6
FINISHING THE INSTALLATION
Fig.13
Step 1. Remove 1 of the 2 screws from the bottom of the hanger bracket and loosen
the other one half a turn from the screw head.
Step 2. Slide the canopy up towards the hanger bracket and place the key hole on
the canopy over the screw on the hanger bracket, turn canopy until it locks in place
at the narrow section of the key holes. (Fig. 13)
Step 3. Align the circular hole on canopy with the remaining hole on the hanger
bracket, secure by tightening the two set screws.
Step 4. Place the canopy cover to the canopy and rotate canopy cover clockwise
until it is locked into right position. (Figure 13)
