듀얼트론 X 사용 설명서
23
■
■
■
■
■
■
■
■
■
■
Dualtron X User Manual
Grip
Brake cable
Brake lever
Handle Post (Steering Tube)
Front, back suspension
Side stand
Suspension arm fixing bolt
Handle body
Headset bearing
•
Use it after taking measures against play, such as turning or removing the
handlebar.
•
Check for damage to wires at both ends of the lever and disc brake, external
bending, oil leakage, and so on.
•
Check or replace the brake when it is not working properly.
•
After operation, check or replace the unit after a large impact such as a large play or fall.
•
If the motor disconnection wiring is damaged and the motor power cutoff is defective, be
sure to use it after taking measures.
•
Always check that the hydraulic brake braking force is sufficient before driving and use after action.
•
Check the bolt nut tightness on each fixing part of the handle configuration.
•
Do not install excessive attachments (baskets, bags, etc.) on the column and
handle. Excessive load on the folding part can cause a safety accident due to
difficulty of steering and excessive load on the folding part.
•
Loosen the bolts and nuts of the relevant part to fix the suspension after
a certain time of use Check the fixed state such as the rim, and the
suspension restoring force is reduced or bent When loads, cracks and
deformations occur, they must be replaced before use.
•
If you ride on the product or drive with the side stand upright, do not
attach to the side stand as this may cause damage to the product or
safety accidents. It is forbidden to apply reasonable force.
•
When the suspension arm fixing bolt which connect the suspension arm
and swing arm has a play, this may cause interference and should be
checked at all times.
•
Tighten and secure the fixing
bolts, Check for cracks.
•
Keep operation smooth.
•
Use after action in play.
(1) Tightening condition of fixing bolts and nuts such as tires, wheels, motors, discs, brakes, handles, chassis, wheels,
etc. Please use after checking the loss.
(2) In case of tire damage, wear or abnormal wear, replace and use immediately.
(3) Always check the tire pressure before riding and inflate it to the value indicated on the side of the tire.
(4) Check the operating condition of the brake, check the pad consumption, and the oil leakage condition.
(5) If a disc is deformed or stamped or if calibration is not possible, replace it before use.
* Use it after checking the fixing bolt, tightening condition and loss of all parts of the product except the parts not
specified.
* Throttling Use to ㅁ Turn off the Cruise function:
You cannot cancel the cruise using the throttle. You can only release
the brake.
* Precautions for using Cruise function:
When the cruise function is activated, make sure that the cruise function is
released and braking is possible for safety while driving. Drive the brakes in a ready position.
*Precautions for using the ABS function:
Due to the nature of the ABS function of repeatedly holding and releasing the
brake several times for one second, frequency of loosening of the fixing bolts such as motor, rim, and motor shaft may
increase. Checking always is required.
Main check
Regular inspection