miniland 89318, Instruction Manual, Quick Manual, And Warranty

Page: 16 / 80

16
4.1 DESCRIPTION OF THE PARTS
4.1.1 HUMIDIFIER (Figure 1)
1. Nozzle
2. Water tank
3. Water tank cover
4. Water filter
5. Control panel
6. Base of the unit
7. Ultrasonic transducer
8. Air outlet
9. Essence compartment
10. Mains adaptor
11. Temperature and humidity sensor
12. Nightlight
13. Additional sponges
4.1.2. CONTROL PANEL (Figure 2)
A. Screen
B. Status indicator
C. On/off
D. Mist outlet setting
E. Relative humidity setting
F. Timer setting
4.2. PRINCIPLES OF OPERATION
The humidifier uses the water stored in the water tank to make water vapour. The
machine’s fan system releases this vapour into the dry air, creating the necessary
humidity.
5. INSTRUCTIONS FOR USE
5.1. ADDING WATER (Figure 3)
Users are advised to use the humidifier with distilled water. (Follow the instructions in
the Cleaning section).
To add water, follow the instructions below:
1. Place the device on a flat surface. Remove the water tank cover (3) from the base
of the unit.
2. Add cold water to the water tank (2). Do not add hot water, as it will leak.
3. Carefully fit the cover back on the water tank.
NB: Do not move the device when the water tank is totally full.
5.2. POWERING THE HUMIDIFIER ON AND OFF
To switch the humidifier on, plug the adapter in to the mains and press the on/off button
(C). The screen and the blue night light will light up.
NOTE: The screen switches off after ten seconds for a better night’s sleep, but the
humidifier continues to work. Press any button to switch the screen on again.
5.3. NIGHT LIGHT
To switch the night light off or on, you can do so under the HUMITOP CONNECT
section of the eMyBaby® application or by pressing the relative humidity setting button
(E) for two seconds. The night light and the screen will switch off. To switch just the
screen on, press any button.
5.4. ADJUSTMENT OF THE TIMER
To program the unit to switch off automatically, you can do so under the HUMITOP
CONNECT section of the eMyBaby® application or by pressing the timer setting button
(F). The “01” symbol will be displayed on screen, indicating that after 1 hour the
device will switch off automatically. Keep pressing the button (F) to set the timer
ENGLISH