miniland 89062, Manual

Page: 26 / 115

5.3. TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE SOLUTION
Power light does not
come on
Parent unit: Unit is not
turned on.
Slide the Power button
(13) up
Power adaptor is not
plugged in or batteries
are too low.
Plug in power adaptor or
replace the battery pack
with a new one.
Baby monitor: Unit is not
turned on.
Press and hold the
Power button.
Power adaptor is not
plugged in or batteries
are too low.
Plug in power adaptor
or replace the batteries
with a new one.
High pitched noise Both units are too close
together.
Move parent unit away
from the baby monitor.
Adjust the parent unit
into acceptable volume
level.
No sound Volume on parent unit is
set too low.
Adjust the volume to
highest level.
Power red LED is
flashing
Batteries are low. Replace batteries
Interference or poor
reception
Mobile or cordless
phones are too close to
the baby monitor.
Move those phones
away from baby monitor.
There is no connection
between the units.
(Link red LED is flashing)
The units are out of
range
Move the units closer
The units are not linked Please check “Pairing
the units” section
Other malfunctions Contact the MINILAND technical service