miniDSP Ltd – Hong Kong / Email :
/ Features and Specifications are subject to change without prior notice
P 17
You can now connect to the unit and start synchronizing to the unit again.
Step 7
: If the plug-in upgrade instructions included a DSP firmware upgrade (i.e. different from the above step), you must “Restore to
default” the DSP in order to push a new DSP configuration (i.e. algorithm for audio processing). Once connected to the unit, click on:
Restore - > Factory default to clear all memory and overwrite the DSP configuration
Step 8:
With the unit now running both a CPU & DSP new firmware, you can reload your setting configuration. Just go to the backed
up files you saved previously. Then reload each of them as follow:
Click on
Config 1
button -> File -> Load configuration to current slot - > Browse to setting1.xml file
Click on
Config 2
button -> File -> Load configuration to current slot - > Browse to setting2.xml file
And so on.
Step 9:
Start an audio source and monitor your input/output signal to insure all levels are correct.
It’s now time to connect your output sources and get your unit up&running again.
If you have any questions, feel free to get in touch with us.
