miniDSP Ltd, Hong Kong /
www.minidsp.com
/ Features and specifications subject to change without prior notice
26
3.6.1
Selecting a configuration
The current configuration is selected by one of the four buttons in the Configuration Selection area. By default,
configuration 1 is selected:
To switch to a different configuration, click on a different button. If the interface is live, real-time processing in
the nanoAVR will be updated to the newly selected configuration, and audio processing will then continue. If,
however, the selected configuration has changed in the user interface since the newly selected configuration
was last synchronized to the nanoAVR, then a dialog will appear asking you if you want to synchronize the local
configuration to the nanoAVR.
If the user interface is not connected, then the screen will update to show the parameters of the newly selected
configuration. If this configuration is changed in the user interface, it will be downloaded to the nanoAVR next
time it is synchronized.
Note: because of the potential for a selected configuration to be in an unknown state, we
recommend that each configuration be selected and checked/initialized prior to connecting to the
nanoAVR for the first time.
3.6.2
Saving and loading configurations
Configurations can be saved to and loaded from files. Each configuration is stored in a separate file. It is strongly
recommended that each configuration programmed into the nanoAVR be saved to a file, to ensure that the
configuration is not lost if the nanoAVR is inadvertently reset. A configuration file stores all of the audio
processing parameters except for the master volume setting and the HDMI input selection.
To save the currently selected configuration to a file, drop down the File menu, then select
Save
and then
Save
current configuration
. In the file box, select a location and name of the file, and save it.
To load a configuration, first select the configuration preset that you wish to load the parameters into. Then
drop down the File menu, select
Load
, and then
Load configuration to current slot
.
