miniDSP Ltd, Hong Kong /
www.minidsp.com
/ Features and specifications subject to change without prior notice
13
3
C
ONFIGURING THE NANO
AVR
The nanoAVR is configured with the
nanoAVR
or
nanoAVR_BM
plugin / user interface program. Once the
nanoAVR is fully configured, the user interface is no longer required, as source and preset selection can be done
with the front panel or a remote control – see
Using the nanoAVR
below. If desired, however, the user interface
can remain connected during use for real-time (“live”) control of all settings in the nanoAVR.
This screenshot shows the nanoAVR 8x8 user interface window with the key areas highlighted:
The above screenshot shows the standard
nanoAVR
plugin. The
nanoAVR_BM
plugin for bass management has
an additional screen in the Selection tab. See
Bass Management
below.
Note: during initial configuration of the nanoAVR, it is recommended that the connected HDMI output
device be muted.
