Minicom Smart IP Extender User Manual Download | Manualshive

Page: 5 / 68

background image

USER GUIDE

4

1. Welcome

The Smart IP Extender system is produced by Minicom Advanced Systems Limited.

Technical precautions

This equipment generates radio frequency energy and if not installed in accordance
with the manufacturer’s instructions, may cause radio frequency interference.
This equipment complies with Part 15, Subpart J of the FCC rules for a Class A
computing device. This equipment also complies with the Class A limits for radio
noise emission from digital apparatus set out in the Radio Interference Regulation of
the Canadian Department of Communications. These above rules are designed to
provide reasonable protection against such interference when operating the
equipment in a commercial environment. If operation of this equipment in a
residential area causes radio frequency interference, the user, and not Minicom
Advanced Systems Limited, will be responsible.
Changes or modifications made to this equipment not expressly approved by
Minicom Advanced Systems Limited could void the user’s authority to operate the
equipment.
Minicom Advanced Systems Limited assumes no responsibility for any errors that
appear in this document. Information in this document is subject to change without
notice.
No part of this document may be reproduced or transmitted in any form or by any
means, electronic or mechanical, for any purpose, without the express written
permission of Minicom Advanced Systems Limited.
© 2004 Minicom Advanced Systems Limited. All rights reserved.

Trademarks

PS/2 is a registered trademark of International Business Machines Corporation. All
other trademarks and registered trademarks are the property of their respective
owners.

«
...
3
4
5
6
7
...
»

Summary of Contents for Smart IP Extender





































































Reviews:

No comments

Related manuals for Smart IP Extender

Brand: Abus Pages: 32

Brand: W Box Pages: 25

Brand: Oursson Pages: 34

Brand: Hendi Pages: 72

Brand: Hamilton Beach Pages: 20

Brand: Hallde Pages: 38

EnviroNET 2100 Series

Brand: Patton electronics Pages: 43

Brand: Planet Pages: 28

Brand: Phonetone Pages: 8

Brand: A-Neuvideo Pages: 8

Compact Food Processor

Brand: Morphy Richards Pages: 8

COPPERLINK 2151

Brand: Patton electronics Pages: 20

Brand: Patton electronics Pages: 53

Brand: Nikrans Pages: 19

Brand: ElectrIQ Pages: 25

Brand: Cornell Pages: 4

Brand: RedOne Pages: 5

Brand: PEPCOOK Pages: 28

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands