SMART CAT5 SWITCH 16 IP
.
81. Tuning – F5
You can tune the image of any computer screen from the Select Computer
window.
To adjust the screen image:
1. Navigate to the computer you wish to adjust.
2. Press
F5
. The screen image of the selected computer appears, together with the
Image Tuning label.
3. Adjust the image by using the
Right
and
Left
Arrow keys.
4. When the image is satisfactory, press
Esc
.
Note! Picture quality is relative to distance. The further away a remote computer
is from the Smart 16 IP, the lower the image quality, and the more tuning needed.
So place the higher resolution computers closer to the Switch.
82.
83.
Moving the label – F6
Position the Confirmation label anywhere on the screen.
To position the label from the Main window:
1. Navigate to the desired computer using the
Up
and
Down
arrow keys.
2. Press
F6
. The selected screen image and Identification label will appear.
3. Use the arrow keys to move the label to the desired position.
4. Press
Esc
to save and exit.
Using the Control software
As an alternative to the OSD operate the system with the Control software located
on the Marketing & Documentation CD. With the OSD you operate the system
and view the computer screens on the same monitor. The Control software
requires 2 monitors: 1 for the software and 1 to view the computer screens.
With the Control software you can:
•
View computers
•
Edit OSD settings
•
Save configurations for future use
•
Read configurations from and write configurations to the Smart 16 IP
Switch
63
.
Summary of Contents for Smart CAT5 Switch 16 IP
Page 79: ...OPERATING GUIDE 78 OPERATING GUIDE 78...
Page 80: ...SMART CAT5 SWITCH 16 IP 79...
