Mini CLUBMAN, Owner'S Manual

Page: 159 / 324

An appropriate Check Control message is
displayed.
1. Move the respective seat all the way for-
ward.
2. Move the respective seat forward again.
The seat moves forward briefly.
3. Readjust the seat to the desired seat po-
sition.
The calibration procedure is completed
when the Check Control message disap-
pears.
If the message continues to be displayed,
repeat the calibration.
If the message does not disappear after a re-
peat calibration, have the system checked
as soon as possible.
Tire pressure monitor
Principle
The system monitors tire pressure in the
four mounted tires. The system warns you if
there is a significant loss of pressure in one
or more tires.
General information
Sensors in the tire valves measure the tire
inflation pressure and, depending on the
model, the tire temperature.
Further information and instructions on us-
ing the system can also be found under Tire
inflation pressure, refer to page 252 .
Functional requirements
The following prerequisites must be met for
the system; otherwise, reliable message of a
tire pressure loss is not assured:
– After a tire or wheel change, a reset was
performed with the correct tire inflation
pressure.
– After the tire inflation pressure was ad-
justed to a new value, a reset was per-
formed.
– Wheels with TPM wheel electronics.
Status display
Current status
The system status can be displayed on the
Control Display, e.g., whether or not the sys-
tem is active.
Via the Central Information Display (CID):
1. "My MINI"
2. "Vehicle status"
3. "Tire Pressure Monitor"
The current status is displayed.
Tire conditions
General information
Tire and system status are indicated by the
color of the wheels and a text message on
the Control Display.
All wheels green
System is active and will issue a warning re-
lated to the tire inflation pressures stored
during the last reset.
One to four yellow wheels
A flat tire or major tire pressure loss has oc-
curred in the indicated tires.
Gray wheels
It may not be possible to identify tire pres-
sure losses.
Possible causes:
Seite 159
Safety CONTROLS
159
Online Edition for Part no. 01405A541A8 - II/22