Mini CLUBMAN, Owner'S Manual

Page: 271 / 324

4. Hand-tighten the remaining lug bolts
and tighten all lug bolts well in a cross-
wise pattern.
5. Turn the jack crank handle counter-
clockwise to retract the jack and lower
the vehicle.
6. Remove the jack and stow it securely.
After the wheel change
1. Tighten the lug bolts crosswise. The
tightening torque is
101 lbs ft/140 Nm.
2. Stow the faulty wheel in the cargo area,
if necessary.
The faulty wheel cannot be stored under
the cargo area floor because of its size.
3. Check tire inflation pressure at the next
opportunity and correct as needed.
4. Reinitialize the Flat Tire Monitor.
Reset the Tire Pressure Monitor again.
5. Check to make sure the lug bolts are
tight with a calibrated torque wrench.
6. Have the damaged tire renewed at the
nearest dealer's service center or an-
other qualified service center or repair
shop.
Emergency wheel
Principle
In the event of a flat tire, the emergency
wheel can be used in place of the wheel
with the faulty tire. The emergency wheel is
only intended for temporary use until the
faulty tire/wheel has been replaced.
General information
Mount one emergency wheel only.
Also check the tire inflation pressure of the
emergency wheel in the cargo area regu-
larly, and correct it as needed.
Safety information
Warning
The emergency wheel has particular di-
mensions. When driving with an emer-
gency wheel, changed driving properties
may occur, for instance reduced direc-
tional stability when braking, longer brak-
ing distance, and changed self-steering
properties in the limit range. There is a
risk of accident. Drive moderately and do
not exceed a speed of 50 mph/80 km/h.
Overview
The emergency wheel and the wheel change
tools are located in the cargo area under the
cargo area floor.
Removing the emergency wheel
1. Pull up and remove the cargo area floor.
2. Unscrew the wing screw.
3. Remove the retaining plate or the cover.
4. Where applicable, remove the holder
and the trailer hitch.
Seite 271
Wheels and tires MOBILITY
271
Online Edition for Part no. 01405A541A8 - II/22