Mini CLUBMAN, Owner'S Manual

Page: 188 / 324

Instrument cluster without enhanced
features:
The stored speed is displayed by the
icon in the Info Display of the instrument
cluster.
Instrument cluster with en-
hanced features:
The stored speed is displayed.
If necessary, the Dynamic Stability Control
will be turned on.
Changing the speed
or button: press until the desired
speed is set.
If active, the displayed speed is stored and
the vehicle reaches the stored speed when
the road is clear.
– or button: each time it is
pressed to the point of resistance, the
desired speed increases or decreases by
approx. 1 mph/1 km/h.
– or button: each time it is
pressed past the resistance point, the
desired speed changes by a maximum of
5 mph/10 km/h.
or button: hold down to repeat the
action.
Adjusting the distance
Safety information
Warning
The system cannot serve as a substitute
for the driver’s personal judgment. Due to
the system limits, deceleration can be late.
There may be a risk of accident or risk of
damage to property. Be aware to the sur-
rounding traffic situation at all times. Ad-
just the distance to the traffic and weather
conditions and maintain the prescribed
safety distance, possibly by braking.
Reduce distance
Press the button repeatedly until
the desired distance is set.
Instrument cluster without enhanced
features:
The set distance is briefly displayed
in the left part of the Info Display of the in-
strument cluster.
Increase the distance
Press the button repeatedly until
the desired distance is set.
Instrument cluster without enhanced
features:
The set distance is briefly displayed
in the left part of the Info Display of the in-
strument cluster.
Continuing cruise control
General information
An interrupted cruise control can be contin-
ued by calling up the stored speed.
Make sure that the difference between cur-
rent speed and stored speed is not too large
before calling up the stored speed. Other-
wise, unintentional deceleration or acceler-
ation may occur.
In the following cases, the stored speed
value is deleted and cannot be called up
again:
– When the system is switched off.
– When the ignition is switched off.
Seite 188
CONTROLS Driving comfort
188
Online Edition for Part no. 01405A541A8 - II/22