Safety precautions
iv
Power source
Waring
Install cables while the power is turned off.
If you work while the power is turned on, you may get an electric shock or CSD-912B may
be damaged.
Before turning the power on, be sure to check that the display and the
VSHFL¿FDWLRQRIWKHSRZHUVXSSO\YROWDJHRI&6'%PDWFKHVWKDWRIWKHSRZHU
source to use.
&RQWDFWXVLIWKH\GRQRWPDWFK8VLQJDQXQFRQ¿UPHGSRZHUVRXUFHPD\UHVXOWLQ
damages to CSD-912B or an electric shock.
Caution
Be sure to connect a grounding wire.
Failing to connect a grounding wire may result in electric shock or malfunctions.
Operating precautions
Caution
%HVXUHWRSHUIRUPFDOLEUDWLRQEHIRUHXVLQJ&6'%IRUWKH¿UVWWLPHRUDIWHU
replacing strain gage based transducers.
Without calibration, precise measurement results may not be obtained or malfunctions may
occur, which may cause damages to peripheral equipment.
Recalibrate the instrument if it has been calibrated but produced incorrect results since this
may cause damages to peripheral equipment.
&RQ¿UPWKDWWKHZLULQJLVFRUUHFWO\SHUIRUPHGEHIRUH\RXVWDUWWRXVH&6'%
Incorrect wiring may result in incorrect measurements and malfunctions, which may cause
damages to peripheral equipment and serious accidents.
Do not carelessly change the settings of CSD-912B during measurement.
Changing the settings may cause incorrect measurements and malfunctions, which may
cause damages to peripheral equipment.
Protect CSD-912B from impact or shock. For example, be sure not to strike an
object against it.
Impact or shock may damage the instrument or cause failures in the electric circuits.
Do not disassemble CSD-912B except for operations allowed by this instruction
manual such as removing the liquid crystal display.
Disassembling may damage the case or the liquid crystal display, or affect the durability
and operations.
When the display surface gets dirty, wipe it gently with a soft cloth or a cloth
moistened with neutral detergent or slight amount of ethyl alcohol.
Handle chemicals with great care not to affect human health.
Summary of Contents for CSD-912B
