6
4. Setting of CC
−
Link connecting
Please set the following in the function mode when you use CC
−
LINK interface.
Please refer to clause 8
−
1 of the CSD
−
815B instruction manual for ”Method of setting the function”.
4
−
1. Detail of CC
−
Link setting
Setting of the station(Function F
−
84)
The station of CC
−
LINK is set.
The range which can be set is “0”
−
“2”.
Default is set as [2].
F
−
84
Occupied
stations No.
0
1 station
1
2 stations
2
4 stations
●
Setting changes for occupied stations No is corresponding to this
software after ROM Ver. 1200 and after CC
−
Link I/F CARD software
ROM Ver. 04.
Before ROM Ver. 1.100 and Ver. 03 is fixed 4 station occupied station
No.
4
−
2. Setting of the station(Function F
−
85)
Excute the setting of the station.
When it is 1 occupied station: selectable from station No 01 to 64.
When it is 2 occupied station: selectable from station No 01 to 63.
When it is 4 occupied station: selectable from station No 01 to 61.
The occupied station of this instrument is 1., 2, 4 stations.
For example, when the station number is assumed to 1 station and station No is set as 01, 01 to 04
stations are occupied. Therefore, the station number must not overlap.
Default is set as [01].
4
−
3. Setting of baud rate(F
−
86)
Excute the setting baud rate (unit: bps).
The range which can be set is from [0] to [4].
Default is set as [0]. Each setting value for baud rate is as fallow.
F
−
86 setting value
Baud rate
0
156 kbps
1
625 kbps
2
2.5 Mbps
3
5 Mbps
4
10 Mbps
