Minebea CSA-562B, Instruction Manual

Page: 14 / 34

4
3
−
2. OUTPUT connector
(1) Pin layout
Pin No. Signal Name Cable color
1 Voltage output(
＋
) Red
2 Voltage output(
−
) Red/White
3 Current output(
＋
)(Option) Black
4 Current output(
−
)(Option) Black / White
5 External input for check switch Yellow
6 Common for external input Yellow / White
7 ALARM output Green
8 Common for ALARM output Green / White
9 No use
10 No use
P/N of connector plug
：
SRCN6A16
−
10S (JAE)
(2) Connection of voltage output
＋
−
V
to D.V.M. or sequencer
Red
Red / White
(3) Connection of current outptu(Option)
＋
−
Black
A
to D.V.M. or sequencer
Black / White

●
As for standard unit, the electric current output is not adjusted.
●
Execute the adjustment of current output after completing the adjustment of voltage
output. When the procedure is made oppositely, the adjusting condition of current
output changes.
●
Connection of the instrument with the stator (In the case of the stator is grounded.)
makes the voltage output (
−
) and current output (
−
) to the same potential as the
ground potential