Minebea Intec PR 6012/02, Installation Manual

Page: 22 / 30

5.2 Tightening torques
The corresponding tightening torques are given in the following table.
Mounting kit Mounting parts Screws Washer Tightening tor-
que
PR 6012/02N,
PR 6012/32N M8-8.8 * 22 Nm
PR 6012/42N
Upper plate
M12-8.8 ** 85 Nm
PR 6012/02N,
PR 6012/32N M8-8.8 * 22 Nm
PR 6012/42N
Lower plate
M12-8.8 ** 85 Nm
PR 6012/02S,
PR 6012/32S M8-A2-70 * 16.5 Nm
PR 6012/42S
Upper plate
M12-A2-70 ** 56.0 Nm
PR 6012/02S,
PR 6012/32S M8-A2-70 * 16.5 Nm
PR 6012/42S
Lower plate
M12-A2-70 ** 56.0 Nm
*
Recommendation for the washers of
M8 mounting screws:
DIN 7349 (d = 21, h = 4) or DIN 9021 or
ISO 7093-2 (d = 24, h = 2)
**
Recommendation for the washers of
M12 mounting screws:
DIN 7349 (d = 30, h = 6) or DIN 9021 or
ISO 7093-2 (d = 37, h = 3)
5.3 Assembly
5.3.1 Safety instructions
WARNING
The vessel may turn over during mounting.
Securing the vessel against tipping is imperative.
Use an appropriate lifting jack.
WARNING
Warning of hazardous area and/or personal injury
The locking washers of the constrainers may only be used once.
Insert new washers in case they have been damaged or removed. Spare parts, see
Chapter
8.1 .
Maxi FLEX and Maxi FLEXLOCK mounting kits PR 6012/02, ../32, ../42 5 Installation
EN-20 Minebea Intec