Symbols/mass unit
Description
In the W&M mode, an invalid weight will be display-
ed without a weight unit.
e.g.: 10-fold resolution, -20 d
t, kg, g, lb
These mass units are available.
Weighing range/Weighing
points
Description
•
•
•
Range 1, 2, 3 active
A, B, C, D, E, F, G, H
Max. 8 weighing points in the token ring
----
No more data are received for the weight point.
Display
Description
----
No more data are received for the weight point.
3.4.2
Operation using the front-panel keys
The following table shows the basic meanings of the symbols on the front-panel keys.
Indicator keys
Set tare
Press Tare/reset tare for the displayed
weighing point in the indicator, provided
that:
-
the weight value is stable.
-
the device is not in error status.
The key can be deactivated in parameter
OP 016.
The currently displayed weighing point is
set to zero, provided that:
-
the weight value is stable.
-
weight is within zero setting range.
The key can be deactivated in parameter
OP 016.
Switching the display
The weight mode of the currently dis-
played, tared weighing point is shown for
2 seconds.
Pressing the key switches to the next
weight.
"Follow" must be selected in the parame-
ter "Weight".
A print-out is started for the displayed
weighing point. The conditions are deter-
mined by the application of the sending
unit.
This key can be deactivated in parameter
OP 016.
3 Remote display
Remote display PR 5110/60, ../70
EN-13
Minebea Intec
All manuals and user guides at all-guides.com
