Minebea Intec IS16EDE-H, Installation And Operating Instructions Manual

Page: 19 / 40

Installation and Operating Instructions IS16/34/64EDE 19
Care and Maintenance
In this case, notify your nearest Minebea Intec Service Center or the International
Technical Support Unit based in Bovenden, Germany. Maintenance and repair
work may be performed only by authorized Minebea Intec service technicians
who have access to the required maintenance manuals and have attended the
relevant service training courses.
Instructions for Recycling the Packaging
Minebea Intec products are packaged to ensure safe shipment using
environmentally friendly materials. After successful installation of the
equipment, you should return this packaging for recycling. For information on
recycling options, including recycling of old weighing equipment, contact your
municipal waste disposal center or local recycling depot.
C
Marking
The
C
marking affixed to the equipment indicates that the equipment meets the
requirements of the following Directive(s):
Council Directive 89/336/EEC “Electromagnetic Compatibility (EMC)”
Applicable European Standards:
Limitation of emissions:
EN 50081-1 Residential,
commercial and light industry
EN 50081-2 Industrial environment
Defined immunity
to interference:
EN 50082-1 Residential,
commercial and light industry
,EN 50082-2Industrial environment
Important Note:
The operator shall be responsible for any modifications to Minebea Intec
equipment (not permitted on equipment to be verified) and for any connections
of cables or equipment not supplied by Minebea Intec and must check and, if
necessary, correct these modifications and connections. On request, Minebea
Intec will provide information on the minimum operating specifications
(in accordance with the Standards listed above for defined immunity to
interference).
When you use electrical equipment in installations and under ambient conditions
requiring higher safety standards, you must comply with the provisions as
specified in the applicable regulations for installation in your country.