— MIN.INIT
3.6 - Minimum load for application
— 1 DIGIT
3.6.1 - 1 digit*
— 2 DIGIT
3.6.2 - 2 digits
— 5 DIGIT
3.6.3 - 5 digits
— 10 DIGT
3.6.4 - 10 digits
— 20 DIGT
3.6.5 - 20 digits
— 50 DIGT
3.6.6 - 50 digits
— 100 DIG
3.6.7 - 100 digits
— 200 DIG
3.6.8 - 200 digits
— 500 DIG
3.6.9 - 500 digits
— 1000 DI
3.6.10 - 1000 digits
— RESOLUT
3.9 - Resolution for calculation of reference
value
— DISP.ACC
3.9.1 - Display accuracy*
— 10 FOLD
3.9.2 - plus 1 decimal place (10 fold)
— 100FOLD
3.9.3 - plus 2 decimal places (100 fold)
— DEC.PLCS
3.10 - Decimal places in displayed result
— NONE
3.10.1 - None
— 1 DEC.PL
3.10.2 - 1 decimal place
— 2 DEC.PL
3.10.3 - 2 decimal places
— 3 DEC.PL
3.10.4 - 3 decimal places
— SAVE WT
3.11 - Parameter for saving weight values
— STABIL.
3.11.1 - With stability*
— ACC.STAB
3.11.2 - With increased stability
— REF.WP
3.13 - Reference weighing instrument
— NO WP
3.13.1 - No platform selected*
— WP 1
3.13.2 - Weighing platform 1
— WP 2
3.13.3 - Weighing platform 2
— CALC.DIS
3.15 - Display of calculated value
— RESID.QT
3.15.1 - Residue*
— LOSS
3.15.2 - Calculation
Note:
The entered value remains active until deleted by pressing the
key or until
overwritten by a new value. It remains saved after the scale is switched of.
7.10.5
Available Parameter Settings
Description of the parameters:
-
Minimum load for application, see chapter
-
Resolution, see chapter
-
Decimal Places, see chapter
-
Parameter for Saving Weight Values, see chapter
-
Weighing in Percent with Two Weighing Platforms, see chapter
.
Menu tree of the parameters Weighing in percent:
PERCENT
* Factory setting
Combics 2 Series Complete Scales Models CAW2P, CAW2S
7 Operating
EN-132
Minebea Intec