manualshive.com logo in svg

Minebea Intec CAIS3, Service Manual

Share
Download
Minebea Intec CAIS3 Service Manual Download Page 34

33

Service Manual Combics 

t

  "DISPLAY " appears on the display.

t

 The display back lighting turns off and then on again.

y

 All segments in the display are activated.

y

 Carry out the visual inspection.

t

 All LEDs turn off and then on in sequence (for Combics 2). 

  Then they all turn on and then off together.

   Important!

h

 

You can speed up the test program by pressing the 

t

 key.

 

 

y

  "KEYBOARD" appears on the display. 

  The keys that must be checked appear in sequence on the display.

t

  Carry out the keypad test. All keys that need to be pressed appear on the display. Keys 

should be pressed within 5 sec otherwise the program will see this as a key error.

y

  It must be possible to clearly feel and hear the click action of the key.

y

  Then the internal test of the memory components takes place. 

The display shows "SRAM" and "EEPROM" in succession.

y

  If available, the Alibi memory test (option E5) takes place. 

The display shows "FLASH " and "       " in succession.

Operating Design | Test Program Combics 1 | 2  

n ( )

Summary of Contents for CAIS3








































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands