MindWare Technologies MindWare Mobile Product Manual Download Page 8

07    

Important Information

FCC STaTEMENT

 

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two    

 

conditions:

 

 

1.  This device may not cause harmful interference, and

 

 

2.  this device must accept any interference received, including interference that may    

 

 

      cause undesired operation.

 

 

Within the 5150 to 5250 MHz band (5 GHz radio channels 34 to 48) the device is restricted to    

 

indoor operations to reduce any potential for harmful interference to co-channel MSS operation.

 

Any changes or modifications NOT explicitly APPROVED by MindWare Technologies could cause  

 

the module to cease to comply with FCC rules part 15, and thus void the user’s authority to    

 

operate the equipment.

IC COMPLIaNCE

 

This device complies with Industry Canada licence-exempt RSS standard(s).

 

Operation is subject to the following two conditions:

 

 

1. This device may not cause interference, and

 

 

2. this device must accept any interference, including interference that may cause   

 

 

       undesired operation of the device.

 

 

Within the band 5150 - 5250 MHz the operation of this device is restricted to indoor use to  

 

 

reduce the potential for harmful interference to co-channel mobile satellite systems.

CONFORMITé AUx NORMES D’IC

 

Cet appareil est conforme à la(aux) norme(s) RSS sans licence d’Industry Canada.

 

Son utilisation est soumise aux deux conditions suivantes :

 

 

1.  Cet appareil ne doit pas causer d’interférences et

 

 

2.  il doit accepter toutes interférences reçues, y compris celles susceptibles d’avoir des    

 

 

      effets indésirables sur son fonctionnement.

 

 

Dans la bande de fréquences 5150 - 5250 MHz, le fonctionnement de cet appareil est limité à    

 

une utilisation à l’intérieur pour réduire le potentiel d’interférences brouillant les systèmes  

 

 

satellites mobiles d’un même canal.

Summary of Contents for MindWare Mobile










Reviews: