mindtouch TesiraFORTE X 1600, Manual

Page: 9 / 18

Firmware #.#.# .tfa2 file as other Tesira hardware uses. The tfa2 file contains firmware resources for all Tesira devices,
plus the Devio SCX devices.
The tfa2 file is used for updates to both device types via SageVue .
Firmware must be release 4.0 or later to support the TesiraFORTÉ X and Devio SCX.
Input / output options
Dante and AVB
TesiraFORTÉ X is the first TesiraFORTÉ model to support AVB , Dante , and AES67 in one device, hosting a virtual
32x32 channel Dante interface as well as a 128x128 channel Tesira AVB interface. AES67 is supported in the Dante
interface and must be enabled using Dante Controller software. AES67 channels are counted against the Dante channel
count.
If additional AVB or Dante ports are required, up to (3) TesiraCONNECT TC-5 devices may be linked using P1 to
TesiraFORTÉ X P2-5 to increase the system's port count as needed. If multiple TC-5 are required, TC-5 may be
connected in a daisy chain, star, or hybrid daisy-chain/star configuration. TesiraFORTÉ X (P2-5) participates as a media
network switch in this topology.
Always use the non-PoE+ port (P1) of the TC-5 to link to the upstream device to maximize the available PoE+ ports.
AVB
TesiraFORTÉ X supports up to 128x128 AVB audio channels on up to 64x64 AVB streams using implicit AVB.
Audio transport between TesiraFORTÉ X and other Tesira devices in the same system is done via implicit AVB . With
implicit AVB there is no need to manually define AVB paths, the Tesira compiler will automatically determine the path
and establish the required AVB streams between devices.
TesiraFORTÉ X does not support explicit AVB , however, other Tesira Server-class AVB devices in the same system can
support explicit AVB and audio can be routed to and from other AVB processing devices in the system in this manner.
If additional AVB ports are required, up to (3) TesiraCONNECT TC-5 devices may be linked to TesiraFORTÉ X P2-5 to
increase the system's port count as needed. (Adding additional TesiraFORTÉ X to the design will also increase the
available port count with the benefit of additional DSP and AEC processing.) If multiple TC-5 are required, TC-5 may be
connected in a daisy chain, star, or hybrid daisy-chain/star configuration. TesiraFORTÉ X (P2-5) participates as a media
network switch in this topology.
Always use the non-PoE+ port (P1) of the TC-5 to link to the upstream device to maximize the available PoE+ ports.
TC-5D may be used in place of TC-5 in Launch auto-configured systems, but Launch will not be able to leverage the
additional Dante features of TC-5D. Other
AVNU certified AVB switches may also be used to connect AVB peripherals
https://support.biamp.com/Tesira/Miscellaneous/TesiraFORTE_X
Updated: Tue, 07 Dec 2021 16:46:18 GMT
Powered by
9