Mindray BeneFusion SP3 Vet Operator'S Manual Download

Page: 25 / 84

3-4

3.1.4 Fix BeneFusion DS3 Infusion Supervision System

(Optional)

The device can be located in the BeneFusion DS3 Infusion Supervision System.

NOTE



All components of the system are suitable for use in animal

environment.



Removing power cord is to disconnect equipment from power supply.

Please ensure suitable clearance around the System to facilitate connect

and remove power cord.



System assembly and refit during life period must be carried out by

maintenance technicians whom are trained and licensed by the

manufacturer, and evaluated according to the specified IEC60601-1.

Please contact the company if you have any queries.



Please ensure not simultaneously touch animal and device to prevent

animal leakage current from exceeding the requirements specified by

the standard.



Only devices designated by the manufacturer can be connected to the

system. Based on animal safety, do not insert devices that are not

specified by the manufacturer into the system.

3.1.5 Connect the AC Power Source

To connect the pump to the AC power source, follow this procedure:

1. Always use the accompanying power cord delivered with the pump, and check

that both ends of the power cord and surroundings without liquid drug and other

residues.

2. Connect one end of the power cord to the device's AC power supply port, and

check that internal and surrounding AC power supply port without liquid drug

and other residues.

3. Insert the other end of the power cord into the three-plug connector. Check that

the AC/DC indicator light is on.

Summary of Contents for BeneFusion SP3 Vet




















































































Search results

Summary of Contents for BeneFusion SP3 Vet

Reviews:

Related manuals for BeneFusion SP3 Vet

Brands by name

Popular brands

Mindray BeneFusion SP3 Vet, Operator'S Manual

Search results

Summary of Contents for BeneFusion SP3 Vet

Reviews:

Related manuals for BeneFusion SP3 Vet

Brands by name

Popular brands