Minco
Tel: 763. 571.3121 • Fax: 763. 571.0927 • www.minco.com • Doc. #1116290(D)
10
Warranty
Items returned within one year from the date of sale, transportation prepaid, which Minco Products, Inc. (The
"Seller") reasonably determines to be faulty by reason of defective materials or faulty workmanship will be
replaced or repaired at the Seller's discretion, free of charge.
This remedy is to be the sole and exclusive remedy available to the buyer in the event of a breach by the Seller.
Items that show evidence of mishandling or misapplication may be returned by the Seller at the customer's
expense.
Furthermore, the Seller is not to be held responsible for consequential damages caused by its product except as
required under Minnesota Statutes, Section 336.1-719 (3).
This warranty is expressly in lieu of any other expressed warranty or implied warranty of merchantability or fitness
for a particular purpose, and of any other obligations or liability on the part of the Seller or its employees or
agents.
Specifications
Input:
100
or 1000
platinum 2-lead RTD.
Output:
4 to 20 mA DC over specified range.
Accuracy:
+/- 0.1% of span.
Linearity:
+/- 0.1% of span.
Adjustments:
Zero and Span, +/- 5% of span.
Ambient Temperature:
Operating: -25 to 85 °C ( -13 to 185 °F ).
Storage: -55 to 100 °C ( -67 to 212 °F ).
Ambient Temperature
Effects:
+/- 0.007% of span/°F (+/- 0.013% of span/°C).
+/- 0.014% of span/°F for spans less than 20
.
Warmup Drift:
+/- 0.1% of span max., assuming Vsupply = 24 VDC and Rloop = 250
ohms. Stable within 30 minutes.
Supply Voltage:
8.5 to 35 volts DC with no load. Reverse polarity protected.
Voltage effect:
+/- 0.001% of span per volt.
Maximum Load
Resistance:
The maximum allowable resistance of the signal-carrying loop is given
by this formula: Rloop max = (Vsupply-10)/.02 amps.
Maximum Output
Current:
27 mA.
Connections:
Terminal blocks for wires from AWG 22 to AWG 14.
Physical:
Epoxy potted for moisture resistance.
Weight:
1.1 oz. (30 grams).
