MIMAKI UJF-706, Operation Manual, Page: 30 / 184

1-12
How to shake an ink cartridge
Shake ink inside the cartridge once or more a day.
1
Wrap the tip of an ink cartridge with paper towel.
2
Slowly shake the ink cartridge more than twenty times right and left.
• To prevent ink from leaking when you shake the cartridge, wear gloves and firmly cover the A part of
the upper surface of the cartridge and the B part of the bottom surface of the cartridge with paper
towels. Then, shake it more than twenty times right and left so that ink flows inside the cartridge.
• If you shake it too strong, the pack inside may be damaged and it may cause
ink leakage. Therefore, perform this carefully.
• If the remaining amount of ink is less, ink in the cartridge cannot be beaten
enough. Tilt the cartridge until it becomes vertical.
Wrap the tip with paper towel. Tape both ends of the paper towel on
the cartridge.
Cover with paper towel
firmly and shake ink slowly
A part
(the place to stick a needle)
B part
(the slot on the bottom)
Repeat this
A part