manualshive.com logo in svg

MIMAKI UJF-706, Operation Manual, Page: 124 / 184

Share
Download
MIMAKI UJF-706 Operation Manual Download Page 124

4-30

Cleaning of the UV lamp filter

To use this machine for a long time, clean the UV lamp filter at end of the day’s work.

1

Put out the UV lamp and switch OFF the power.

• Press the power switch in the front of this machine.

2

Turn the main power switch OFF on the 
side of this machine.

3

Open the front left cover.

4

Remove the UV lamp filter.

• Remove the hand screw, and then remove the filter

and the filter holder by moving them upward.

• Put on supplied goggles and gloves. Ink may splash into the eye.

• When a screw is dropped in replacing of the filter, contact a distributor in your district or our 

office.

•  If the message on the right is displayed, clean the UV 

lamp filter as soon as possible.

Tools

• Gloves

• Goggles

• Stainless tube brush

MA I N T E N A NC E WA RN I NG

C L E A N U V L AMP F I L T E R

Main power switch

Front left

cover

Summary of Contents for UJF-706

























































































































































































Reviews:

No comments