MIMAKI UJF-706, Operation Manual

Page: 120 / 184

4-26
Wiper cleaning
The wiper sweeps ink stuck on the nozzle of the head.
The wiper becomes tainted with ink or dusts during the operation of this machine.
In order to keep the head in good condition, clean the wiper frequently.
If the message shown on the right appears, perform cleaning of the
wiper immediately.
1
When <LOCAL> is displayed, press the
key.
2
Select the [MAINTENANCE] with the
key, and press the
key.
3
Select the [ST.MAINTENANCE] with the
key, and press the
key.
4
Select the [WIPER CLEAN] with the
key, and press the
key.
• The carriage moves to near the flushing tray on the left.
• The wiper moves to the front.
5
Open the front right cover.
• When cleaning, be sure to put on the supplied goggles and gloves since you may get ink in
your eyes.
Tools
• Wiper Sponge set
(SPC-0578)
• Pre wipe rubber
(SPA-0172)
• UJ Cleaning swab
(SPC-0386)
• Gloves • Goggles
! C L E A N W I P E R
< L OC A L . 1 >
FUNCTION
F UNC T I ON
MA I N T E N A NC E < E N T >
ENTER
MA I N T E N A NC E
S T . MA I N T E N A NC E < e n t >
ENTER
S T . MA I N T E N A NC E
W I P E R C L E A N < e n t >
ENTER
Front right cover