9
Ink tank arrangement of each ink set, and ink IC chip arrangement
Eliminate INK END
If [INK (NEAR) END] occurs after ink tank replacement and automatic supply, do as follows.
1
Refer to P.7 “Replace 10kg ink tank (when the supply pipe is attached)” and set
the ink tank and ink supply pipe.
2
Select [TEST PRINT / CLEANING] > [Solve Ink
End] and press the [ENTER] key.
• Depending on the ink set, even-numbered route ink ICs may not be used.
Be careful not to insert it by mistake.
• In order to resolve [INK (NEAR) END], make sure that the ink
tank and ink supply pipe are set correctly.
1
2
3
4
5
6
7
8
7
5
3
1
2
4
6
8
Front
1
2
3
4
5
6
7
8
M
Y
K
BL
M
Y
K
BL
Lbl
Lm
M
Y
K
BL
4-color
4-color,
⺯ග
M
Y
K
BL
Lbl
FP
FY
FP
FY
Lm
M
Y
K
BL
Lbl
Lm
Lk
6-color,
⺯ග
7-color
6-color
4-color,
fluorescent
6-color,
fluorescent
Solve Ink End
Start
[ENT]
